Product Reviews

SmallRig 2916 Mini Side Handle Review

A compact, adjustable cage handle for filmmakers who want a repositionable grip and a cold shoe without adding much weight.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig 2916 side handle review looks at a compact grip designed for camera cages with two correctly spaced 1/4"-20 side threads.

Its adjustable position, reversible setup and accessory points may suit a small handheld rig, though its mini form is not intended for buyers seeking a larger grip.

SmallRig 2916 Review Summary

The quick verdict

SmallRig 2916 Mini Side Handle
4.8/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2916 Mini Side Handle

A compact, adjustable cage handle for filmmakers who want a repositionable grip and a cold shoe without adding much weight.

  • Designed for mirrorless, digital and other small-camera cages with two side 1/4"-20 threaded holes spaced 18 mm apart.
  • Attaches to the cage with two 1/4"-20 screws.
  • Slides up and down to adjust its position for different cage heights.
  • Can be configured for left- or right-hand use by reversing the connection part with the built-in wrench.

Pros

  • Low weight adds a dedicated grip without a large increase to a small camera rig.
  • Vertical adjustment helps tailor the handle position to the cage and the user’s grip.

Consider before buying

  • It depends on a specific cage interface: two 1/4"-20 side holes with 18 mm spacing.
  • The mini grip may feel too small for buyers who want a larger handle.
Read the full review summary

The SmallRig 2916 combines a lightweight side grip with a mounting interface aimed at compatible camera cages.

It attaches using two 1/4"-20 screws, can slide up or down for positioning, and can be switched between left- and right-hand use with its built-in wrench.

The aluminum alloy and PC+ABS construction keeps the handle portable, while a cold shoe and eyelet provide places for compatible accessories.

It is a practical option for mirrorless and other small-camera rigs when the cage has two side threaded holes spaced 18 mm apart.

The compact size and stated 3.5 kg maximum bearing capacity make rig compatibility and total setup weight important considerations. Buyers should confirm the cage’s hole spacing and think through hand position and attached accessories before committing.

The buying factors

SmallRig 2916 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Cage compatibility

The two-screw attachment is clearly defined, but it requires a cage with matching 1/4"-20 holes at 18 mm spacing.

8/10

Position adjustment

The handle slides up and down, and its orientation can be changed for left- or right-hand use.

7/10

Grip ergonomics

An ergonomic design is intended to make handheld operation comfortable, though the mini size may not suit those who prefer a larger grip.

7/10

Accessory mounting

A cold shoe and eyelet support compatible add-ons such as a flash, microphone or wrist strap.

9/10

Portability

At 139 g, the handle is a lightweight addition to a compact camera rig.

7/10

Rig load fit

The stated maximum bearing capacity is 3.5 kg, so buyers should account for the complete camera setup and avoid exceeding that limit.

Key Features and Specifications of SmallRig 2916

  • Designed for mirrorless, digital and other small-camera cages with two side 1/4"-20 threaded holes spaced 18 mm apart.
  • Attaches to the cage with two 1/4"-20 screws.
  • Slides up and down to adjust its position for different cage heights.
  • Can be configured for left- or right-hand use by reversing the connection part with the built-in wrench.
  • Made from aluminum alloy and PC+ABS plastic, with an ergonomic handle shape.
  • Includes a cold shoe for compatible accessories and an eyelet for a wrist strap.
  • Weighs 139 g and has a stated maximum bearing capacity of 3.5 kg.

Pros and Cons of SmallRig 2916

Pros

  • Low weight adds a dedicated grip without a large increase to a small camera rig.
  • Vertical adjustment helps tailor the handle position to the cage and the user’s grip.
  • Reversible setup supports left- and right-hand configurations.
  • Cold shoe and eyelet provide useful options for compatible accessories and a wrist strap.

Consider before buying

  • It depends on a specific cage interface: two 1/4"-20 side holes with 18 mm spacing.
  • The mini grip may feel too small for buyers who want a larger handle.
  • The 3.5 kg maximum bearing capacity calls for care when configuring a heavier rig.

Who Should Buy SmallRig 2916?

Good fit

Consider the 2916 if your cage has the required side threads and you want a compact handhold that can be repositioned vertically.

Its left- or right-hand configuration gives it flexibility when building a small handheld setup, and the 139 g weight keeps the grip itself relatively light.

The cold shoe and eyelet add practical mounting choices for a compatible flash or microphone and a wrist strap.

Before buying, verify the cage’s hole spacing and check that the handle’s maximum bearing capacity suits the full rig you plan to carry.

Who should skip it

Look elsewhere if you specifically want a larger side grip; the 2916 is described as a mini handle, and its compact dimensions may not match that preference.

Skip it if your cage does not have two side 1/4"-20 threaded holes spaced 18 mm apart, or if your setup exceeds the stated 3.5 kg limit. Confirm the interface and expected rig weight before choosing a handle.

How the SmallRig 2916 Fits a Compact Camera Rig

Check the cage interface first

The two-screw mount is the key compatibility requirement. Check the cage for a pair of 1/4"-20 threaded holes on the side, then confirm they are 18 mm apart.

That quick measurement can prevent choosing a handle that does not line up with the cage.

Set the grip for your shooting position

The handle can slide vertically and be reconfigured for either hand. This allows some adjustment around cage height and shooting preference; consider where your fingers fall and whether the chosen position leaves your usual controls accessible.

Plan accessories around the handle

The cold shoe offers a mounting point for a compatible flash or microphone, while the eyelet is intended for a wrist strap.

These are useful additions to a compact rig, but buyers should consider how their accessory placement affects hand clearance and overall balance.

Keep the full rig within its limit

The stated 3.5 kg maximum bearing capacity gives a clear boundary for planning the setup. Include the camera and attached equipment when considering the load, and allow for the fact that the handle itself weighs 139 g.

Alternatives to SmallRig 2916

One supplied option offers a meaningfully different cage handle configuration; the other candidates do not provide a close enough competing side grip to recommend here.

Camera Mounts & Clamps alternative

SmallRig 3766 Lightweight NATO Top Handle
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 3766 Lightweight NATO Top Handle

Choose the 2916 for a side grip when your cage has the specified screw pattern.

Consider the 3766 if a top grip better suits your handling and your cage has a NATO rail; its multi-point accessory mounting is useful for a more accessory-heavy setup.

  • The 3766 is a top handle for cages with a NATO rail. It weighs 124 g, has five cold shoe mounts and includes 1/4" and 3/8" threaded holes.
  • The 2916 is a side grip that attaches with two 1/4"-20 screws at 18 mm spacing and weighs 139 g.

Is SmallRig 2916 Worth It?

The SmallRig 2916 is worth considering for a compact camera rig if your cage matches its two-hole, 18 mm interface and you prefer a lightweight, adjustable side grip.

Its reversible orientation, sliding position and accessory points make it adaptable to different small-rig setups.

Check compatibility and total rig weight before choosing it.

The mini form may not provide the feel you want if you prefer a larger grip, and the stated 3.5 kg bearing limit should guide what you attach and carry.

Your review at a glance

SmallRig 2916 Mini Side Handle
4.8/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2916 Mini Side Handle

A compact, adjustable cage handle for filmmakers who want a repositionable grip and a cold shoe without adding much weight.

  • Designed for mirrorless, digital and other small-camera cages with two side 1/4"-20 threaded holes spaced 18 mm apart.
  • Attaches to the cage with two 1/4"-20 screws.
  • Slides up and down to adjust its position for different cage heights.
  • Can be configured for left- or right-hand use by reversing the connection part with the built-in wrench.

Written by

downtowngrowers.com Editorial Team

Editorial team

Independent editorial coverage of garden & market.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2916 Mini Side Handle

SmallRig 2916 Mini Side Handle

A compact, adjustable cage handle for filmmakers who want a repositionable grip and a cold shoe without adding much weight.

  • Designed for mirrorless, digital and other small-camera cages with two side 1/4"-20 threaded holes spaced 18 mm apart.
  • Attaches to the cage with two 1/4"-20 screws.
Check Video Reviews on Amazon