Did you know that the make of your vegetable self can determine can determine the safety of your vegetables? Well, you need to need to know that a strong shelf is a safe shelf. What I mean by strong shelf is one that can withstand heavy weight and that which cannot be destroyed by ants and termites. And this could be a shelf made of steel, aluminum, or other metal. You’ll just need a plasma cutter to help you in the whole process of constructing a strong vegetable shelf. Plasma cutting machines can cut metals of various thicknesses.
How plasma cutters work?
A plasma cutter uses electricity and inert gasses to create a plasma. Several gases, such as nitrogen, nitrogen or oxygen, are discharged through a conical nozzle. Ionization stimulates ionization of all atoms in the gases. The atoms form a plasma by separating electrons from the nucleus. The plasma surges out of the conical nozzle and onto the surface you want to make a cut. A tiny opening in the nozzle focuses the plasma stream and accelerates it It’s the temperature, speed, focus, and speed of the plasma that enable a plasma cutter to cut metal like a laser.
Building a vegetable shelf
With a plasma cutter, you can design and build a vegetable shelf that has removable slats. The advantage of building a shelf with removable slats is that you can easily replace or remove the slats when need be. Follow this step-by-step guide on how to build a vegetable shelf using a plasma cutter:
- Get raw materials- visit your local steel joint and purchase raw materials. They include square tubing for the frame and legs, flat stocks for the slats, a square for the lower supports, cold rolled sheet for the lower shelf and funnel.
- Use your plasma cutter to cut the frame to the desired length.
- Cut the slot, this is probably the most tedious step. Cut slots at regular intervals so that your shelf will look organized.
- Weld the top- using the frames you cut in step 2 and the slots you made in step 3, weld up so that you’ll have an intact rectangular figure.
- Test fit- the next thing you’ll do is to try to fit the flat stocks into the slots. After fitting, weld up the flat stocks so that they sit flush with the top.
- Weld on the legs- take into consideration the height you want for your shelf. If you want a shorter one, you can use a plasma cutter to cut the square tubing for the legs into shorter pieces.
- Make the bottom shelf- the bottom shelf should sit in between the four legs. Do some welding to support it to the bottom of the frame. Also, weld some square tubing across the shelf to add more support so that metal sheet making the shelf doesn’t sag at the middle.
- Make the handle- there is no shelf that is complete without a handle. Use some solid for the actual grip and get tubing to connect it to the shelf.
- All is finished- there is nothing more to add to your shelf.
There is nothing as comforting as knowing you have a safe place for your valuables. After building this shelf, you’ll regret not having known how to build it in the past. Remember to follow the safety guidelines when using plasma cutters.
There is nothing as comforting as knowing you have a safe place for your valuables. After building this shelf, you’ll regret not having known how to build it in the past. Remember to follow the safety guidelines when using plasma cutters. https://bestweldinghelmet.review/plasma-cutter/